ASTM D4258 PDF

This standard is issued under the fixed designation D ; the number 1 This practice is under the jurisdiction of ASTM Committee D on Protective. ASTM D Standard Practice for Surface Cleaning Concrete for Coating. ASTM D (Plastic sheet test): Place plastic sheet on concrete stab for 24 hours. o ASTM-D Standard Practice for Surface Cleaning Concrete for.

Author: Meramar Faem
Country: Botswana
Language: English (Spanish)
Genre: Politics
Published (Last): 27 December 2005
Pages: 418
PDF File Size: 9.40 Mb
ePub File Size: 11.67 Mb
ISBN: 892-5-76323-185-2
Downloads: 19953
Price: Free* [*Free Regsitration Required]
Uploader: Voodoolabar

Make sure all visible grease, oil, salts, and soluble welding residues have been removed prior to power tool cleaning by the methods outlined in SSPC-SP 1. Thoroughly cleanse vinyl siding by scrubbing with a warm, soapy water solution.

Rinse carefully and allow to dry. This method is suitable for removal of all visible oil, drawing and cutting compounds, grease, soil, and other soluble contaminants. Already Subscribed to this document. Small residues of rust and paint may be left in the lower portions of pits if the original surface is pitted. Clean off the paste residue. So many corrosion protection lining projects succeed or fail with the quality of the surface preparation achieved before the lining is even installed.

Surface preparation methods as outlined in ASTM D are required if the coating system is incompatible. All loose rust, loose mill scale, loose and other detrimental foreign matter can be removed by power tool cleaning.

ASTM D() – Standard Practice for Surface Cleaning Concrete for Coating

This practice includes surface cleaning of concrete to remove grease, dirt, and loose material prior to the application of coatings. Visible deposits of grease or oil must be removed prior to blast cleaning by any method specified in SSPC-SP 1 or other astn upon methods. We have no amendments or d42588 for this standard. Store finishing lumber and flooring in dry, warm rooms to prevent absorption of moisture, shrinkage, and roughening of the wood.

  KARTHIKA PURANAM ENGLISH PDF

As the voice of the U. You can download and open this file to your own computer but DRM prevents opening this file on another computer, including a networked server.

The surface to be coated must be clean and free of contaminants, oil, loose cement, mortar, and grease. Drywall should be clean and dry. Allow to dry and cure thoroughly for at least 30 days prior to painting. When viewed without magnification, a Astmm Metal Blast Cleaned surface should be free of any visible grease, oil, dust, dirt, mill scale, paint, rust, oxides, corrosion products, and other foreign matter.

To test compatibility, apply a square foot area with the coating system, and allow concrete to dry one week before testing adhesion per ASTM D Your Alert Profile lists the documents that will be monitored. Plan accordingly to handle the runoff.

ASTM D4258 – 05(2017)

Ensure that all surface contamination has been removed by washing with an appropriate cleaner. Visible deposits of grease or oil must be removed prior to power tool surface preparation by any method specified in S4258 1, Solvent Cleaning, or other agreed upon methods. Maintenance painting will frequently not permit or require complete removal of all old coatings v4258 to repainting. Exterior composition board siding hardboard must be thoroughly cleaned and primed with an alkyd primer, whether factory primed or unprimed.

  ASTM E1444 PDF

The room must be ventilated while drying. Standards Subscriptions from ANSI provides a money-saving, multi-user solution for accessing standards.

ASTM D – 05 Standard Practice for Surface Cleaning Concrete for Coating

Surface must be free of laitance, concrete dust, dirt, form release agents, moisture curing membranes, loose cement, and hardeners. The surface may be painted after 30 days if recommended procedures for applying stucco are followed, and normal drying conditions exist. Rinse with clear water and allow to dry.

For exterior surfaces, spackle with exterior grade compounds. Mill scale, paint, and rust that is tightly adhered to the surface may remain even after Brush-Off Blast Cleaning. Add to Alert PDF.

Surface imperfections should be corrected and cleaned prior to painting. Method of cleaning steel to remove dirt, oil, grease, loose rust, loose mill scale, and loose paint using water at pressures of 2, to 2, psi at a flow of 4 to 14 gallons per minute.